Setting the clock, 1 press power, 4 pressmemory – Panasonic RXDS05 User Manual
Page 20: To display the clock (when the unit is on), Press display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Clock
Thé clock has a 24-hour display.
Example:
Setting the clock to 16:20;
1
Press POWER.
(This turns the unit on.)
2
Press CLOCK
and
hold until the
time display starts flashing.
3
While the display is flashing;
Press -I- or — to show desired
time.
4
PressMEMORY.
(The clock now starts operating, and
the display returns to its original sta
tus.)
To display the clock (when the unit
is on):
Press CLOCK.
Selecting the Display
El
(Available only from the remote control)
This operation comes in handy to check the
present time during play or the tape counter
display during recording.
Press DISPLAY.
P^Play status^ Present time —|
I—T
-Tape counter«-------------------'
(The display changes each time the button
is pressed.)
“-------” appears on the tape counter display
when a tape has not been loaded.
20