Recording pause – Panasonic NV-MC20 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
t
During Recording
O Press the Start/Stop Button to stop the recording.
I
Recording Pause
0 Slide the Operation On/Off Switch to the right to turn the VHS-C
Movie off.
•The Operation Lamp will go off.
•No picture can be seen in the EVF.
•As the tape is left wound around the head cylinder, the VHS-C
Movie will automatically switch itself off after 2 days (about 48
hours) If it is left in this condition.
Recording Stop
0 Slide the Operation On/Off Switch to the right again to make the
VHS-C Movie ready for recording the next scene.
•It takes about five seconds for the picture in the EVF to
become stable.
Recording Pause
O Press the Start/Stop Button to start recording again.
•When the VHS-C Movie is in the recording pause mode, the use
of battery power can be temporarily suspended by operating the
Operation On/Off Switch. Operating this switch a second time will
put the VHS-C Movie back into the recording pause mode, so it
will be ready again to start recording.
(18>