Panasonic NV-MC20 - Manual (Page 26)

DUBBING (COPYING)
Connection Of the VHS-C Movie with a Video Recorder
For Playback
Video
Output
Socket
Audio
Output
Socket
AC Adaptor
(supplied)
AV Output Cable
(supplied)
DC Input Cable
(supplied)
To Mains
Socket
DC Output
Socket
To Video Input
Socket To Audio Input
^ Socket
E
For Recording TV Set
(optional)
O Place the VTR into the recording pause mode, at the point on
the tape where you wish to record the picture fronn the recorded
cassette in the VHS-C Movie recording.
0 Locate the exact point on the tape in the VHS-C Movie from
where you want to start copying and put the VHS-C Movie into
the still playback mode.
© Press the Still Button on the VHS-C Movie and the Pause/StitI
Button on the VTR to start the copying.
•The picture quality of a copied tape is inferior to that of the original
tape.
If the VTR used for copying features 2 tape speeds, select the
normal speed (SP mode) for the best result.
•When a tape, that was originally recorded on the VHS-C Movie
and that later has some scene added on a VTR by using the
Insert Editing function, is again played back on the VHS-C Movie,
the playback of the inserted part may be affected by uneven
colour and coloured stripes.
Connection of the VHS-C Movie to a VHS VTR Equipped with
Synchro Edit Function
Connect the Remote Control Socket of the VHS-C Movie and the
synchro edit socket of the recording VTR with the optional synchro
connection cable (VW-K1).
•When editing, it Is possible to operate the playback start and stop
of the VHS-C Movie with the recording start and stop of the
recording VTR.
•For the operation, refer to the operating instructions of the
recording VTR.
<26>