Cautions, Caution for battery replacement – Panasonic NV-MC20 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting of the Date and Clock & Recording the Date/Clock indications
How to Insert the Battery for the Clock Operation
O Reniove the lid on the bottom of the VHS-C Movie with a
screwdriver.
Q
Insert the “LR1130"
size
battery with the polarities (© and ©)
aligned correctly and then replace the lid.
•The clock starts working as soon as the battery is inserted.
Cautions
•When this battery is almost exhausted, the whole time and date
indication will flash.
•When this battery is completely exhausted, the indication
"PLEASE SET BATTERY” will appear.
•To make this indication disappear, press the Date/Time Selector
twice.
•If this indication is still displayed after the battery has been
replaced, turn the VHS-C Movie off and then on again.
CAUTION FOR BATTERY REPLACEMENT
•The life of the battery is about one year, however, it depends on
the frequency of use. Inspect and if necessary, replace the
battery once a year.
•Load the new battery with their polarities (© and 0) aligned
correctly.
•Do not apply heat to battery, or internal short-circuit may occur.
•Remove spent battery immediately and dispose of It.
The "LR1130” size battery (supplied) is necessary for the
operation of the built-in digital clock, and to memorize the
Date/Clock Indications when the VHS-C Movie is turned off.
<21>