Oiie-touch navigation icon, One-touch navigation icon – Panasonic PV-GS39 User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

1

You can play back the last few seconds of the

recorded scene in the Recording Pause Mode.

• Set to Tape Recording Mode.

1

Press the Joystick Control to display the

One-Touch Navigation icon on the lower
right of the screen.

2

Move the Joystick Control [T] until the

page with [ g) ] indication Is displayed.

[Oiie-Touch Navigation icon]

Move the Joystick Control [◄] to select

[0].

• The [RECORDING CHECK STARTED] and

the [ @ ] indication is displayed. After checking,
the Camcorder resumes the Recording Pause

Mode.

The Blank Search Function aids you in locating the
end of the recording on the Cassette quickly (unused

part of the tape).

• Set to Tape Recording/Playback Mode.

1

Press the Joystick Control to display the

One-Touch Navigation icon on the lower
right of the screen.

2

Move the Joystick Control [T] until the

page with [ 4 ] indication is displayed.

[One-Touch Navigation icon]

Move the Joystick Control [►] to select

m-

• A confirmation message appears.

Move the Joystick Control [A] or [T]

to select [YES] and press the Joystick

Control.

"'f e ] ii; ] rc catror and the One-Toucf

Ma',iga;ior. icon appears during tne E.ar.k

Search.

• Approximately 1 second before the last

recorded scene, the Camcorder switches to the

Recording Pause Mode or the Still Playback

Mode.

• If there is no blank left on the Cassette, the

Camcorder stops at the end of the tape.

I To Cancel the Blank Search Function

Before Completion
Move the Joystick Control [T] to select [1].

* •

Still pictures can be recorded on a tape.

• Set to Tape Recording Mode.

1

Press the [PHOTO SHOT] Button in the

Recording Pause mode.

33

®

o

o

3

IQ

i "

• The Camcorder records a still picture for about

7 seconds and then switches back to the
recording pause mode.

If you set [ S ADVANCED] » [ SHTR EFFECT]
» [ON], you can add an image and a sound effect

for releasing the shutter.

Photoshot recording results In slightly inferior
image quality.

■ Continuous photoshot

If you set [ ® ADVANCED] » [ SHTR EFFECT]

» [ON] and keep the [PHOTO SHOT] Button

pressed, the Camcorder will continuously record

still pictures in approx. 0.7 seconds Intervals until
the button is released.

• The screen blinks and, at the same time, a

shutter clicking sound is recorded.

31

Advertising