Panasonic PV-GS39 - Manual (Page 53)

Editing IVIode
still pictures can be recorded on the Memory Card
from scenes that have already been recorded on a
cassette.
1
Set the Mode Dial to Tape Playback Mode.
• The One-Touch Navigation icon is displayed
on the lower right of the screen.
[Oiie-Toiicli Navigation icon]
-- "■■■■
P
Insert a tape which already has recorded
contents and a card.
Move the Joystick Control [A] to start
playback and set the Camcorder to Still
Playback Mode at the scene you wish
to record, and press the [PHOTO SHOT]
Button.
Audio will not be recorded.
Note:
• If you press the [PHOTO SHOT] Button without
pausing, blurred pictures may be recorded.
You can add music or narration to the recorded
Cassette.
• If the tape recorded in the [16bit] Mode is dubbed
with the Audio Dubbing function, the original sound
is erased. (If you wish to preserve the original
sound, use the [12bit] Mode when recording.)
• Audio Dubbing cannot be performed on a recording
made in LP IVIode, (p. 29}
• Set to Tape Playback Mode.
1
Find a scene that you want to add sound
to, and press the [ ii ] Button on the
Remote Control.
AUDIO
UlJli ®REC
VJ
i REVy
:
PLAY
'C
I S^ILLAOV
«1
PAUSfi S
JL'
TILLAPV
i»-
■ STOP .r-
Press the [AUDIO DUB] Button on the
Remote Control.
• The [ MMII] Indication appears.
To start Audio Dubbing, press the [ ii ]
Button on the Remote Control. Or, move
the Joystick Control [A] to select [ •In ]■
■ The [ BDB® ] Indication appears,
• Talk into the microphone.
4 Press the [ m ] Button on the Remote
Control to stop audio dubbing. Or, move
the Joystick Control [A] to select [ •k ]
again.
• The Camcorder is in the Still Playback Mode
again.
■ Before Recording with Audio Dubbing
• Set to Tape Recording Mode
• When you want to preserve the original sound
taken during recording, set [# ADVANCED]
» [ AUDIO REC] » [12bit] to take pictures.
(When set [16bit], the sounds taken during
recording are erased after recording with audio
dubbing.)
• Set [ BASIC] » [ H REC SPEED] » [SP] to
take pictures.
■ To Play Back the Sound Recorded by
12bit Audio Dubbing
Set [ U SETUP] » [ H 12bit AUDIO] » [ST1],
[ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by
Audio Dubbing.
MIX: It plays back both the original sound
and the sound added by Audio Dubbing
simultaneously.
• During Audio Dubbing, it is automatically set to
[ST2]. •
Notes:
• The blank section of a tape cannot be dubbed.
• Sounds sent through the DV terminal cannot be
dubbed.
• If a tape has a non-recorded portion when the tape
is dubbed, images and sounds may be disturbed
when this portion of the tape is piayed back.
• In the case of importing data recorded with Audio
Dubbing to a PC using the PC’s software, only the
original sound (ST1) may be imported, depending
on the software.
m
a.
ptf»
5’
tn
a
53