To stop playback, Proas the stop button, Full auto-stop – Panasonic SC-CH31 User Manual
Page 32: M about the dolby noise reduction system, Listening to tapes, Continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Listening to Tapes
(continued)
■ To stop playback
(Also available from the remote control.)
Proas the stop button.
■ Full auto-stop
When the tape reaches the end, the tape transport will automati
cally slop. However, if you have set the reverse mode select button
to CI!D in the playback mode, the auto-stop function wilt not
operate.
m
About the Dolby Noise Reduction system
(For Australia and Now Zealand only)
Using Dolby NR reduces tape hiss in the high-frequency range, it
boosts the levei of the high-frequency program content during
recording, and lowers it by the same amount during playback,
simultaneously reducing high-frequency noise incurred during the
recording process.
This system has the Dolby B-type of noise-reduction system. With
Dolby B, noise is reduced to about one-third. If you are playing a
tape that was recorded with Dolby NR, use the Dolby NR mode
during playback.
Dolby noise reduction manufactured under iicense from
Dolby Laboratories Licensing Corporation.
“DOLBY" and the double-D symbol □□ are trademarks of
Dolby Laboratories Licensing Corporation.