8 press set, Press the cd play button for automatic recording, About automatic tape level setting (atls) – Panasonic SC-CH31 User Manual
Page 39: To cancel album edit-recording, Press the cd stop button twice
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8
Press SET.
•The system assigns tracks to both sides o1 the tape and
displays the results.
•The time remaining on both sides of the tape appears on the
display.
The time remaining on the tape side A
The time remaining on the tape side B
_______ I
II
from 1
Zi'U
I
~t‘U t
MAX*
D- t
1
t 1
im m m m cs CE
Cp CD CE 03D 0B Ha ►!
T
VOLUME
Tracks to be recorded on both sides
To confirm the time remaining and the tracks to be recorded
on tape side A, press CD EDIT. Each time you press this
button, the display will change as follows:
1. The time remaining and the tracks to be recorded on tape
side A
2. The time remaining and the tracks to be recorded on tape
side B
3. The time remaining and the tracks to be recorded on both
sides of the tape
Press the CD play button for automatic re
cording.
The recording will start after the following steps.
1. The cassette deck starts to rewind the tape to the begin
ning.
2. The cassette deck forwards the tape making a non-record-
ed passage of about 10 seconds and stops to enter the
recording standby mode.
3. The compact disc player automatically scans for the peak
(highest) level of the entire disc (ATLS; see right.) and then
recording will start.
■ About Automatic Tape Level Setting (ATLS)
Since compact discs generally have a wide dynamic range, care-
full setting of the record level is required to achieve the best
recording results.
This system automatically scans (fast search) for the peak (highest)
level of the entire disc, and the tape deck set the appropriate
recording level. During this period, the peak level sound will not be
heard.
■ To cancel album edIt-recordIng
(Also available from the remote control.)
Press the CD stop button twice.
d]
CLEAR will appear on the display.
iiipt
r
Tl
I
rrn
L At
I
U - U
CE (E CD
>
When edit-recording has finished, the cassette deck automati
cally enters the recording standby mode.
If you want to change something you have set, or if an error has
occurred, press the cancel button.
The system will return to the previous setting mode.
39