Panasonic CF-25 - Manual (Page 20)

Security Measures
Setting the Supervisor Password
(enabling, changing, disabling)
1
Run the Setup Utility (c
3 = page 40)
2
Using [§ and (§, select [Supervisor Setup], then press
3
Using and O, select [Supervisor Password], then press
4
%To enable or change your supervisor password
Enter your password at the [Enter Supervisor Password], then press
screen * • " Your,password will hot be displayed on the
I •‘^Please hniit'your password to seven characters Note that there is no dis- *
. ^tinction between upper and lowercase letters ~M ’ \ ; |
j • White colored keys can be used Note that the space bar and function keys 'j
^cannot be used " ‘
• Do not mput your password while holding down on [f^f^'or
• Dse only the upper horizontal row ohnumenc keys to input your user pass-
f word'* The’humenc keys!combined*with alpha bet'keys’oh "the" lower key- '
board cannot be'used . , ’ , -
r • ,Do not forget your password “ 1 1 a password is iorgotten you will be unable
' ' l ' to use your computer'“ [ ^ \ “
#To disable your supervisor password
Using and [^, select [Delete Supervisor Password], then press [)£«»—■ )]
Go to step 7
5
Re-enter your password at the [Enter Supervisor Password
Again]
(This IS for confirmation purposes )
note )-
When you do not want the User Password enabled, changed, or disabled
without permission,
use Ijilj] and to select [User Password Protection] then set [Enablel with
6 Using @ and (§, select [Set Supervisor Password], then press
7
At the confirmation screen, press
8
Press r^T] to end the password setting procedure
8 Close the Setup Utility (c?* page 40)
20