Panasonic NV-G45 Series - Manual (Page 24)

CAMERA RECORDING
O Press the Stop Button (■) on the VTR to stop the
recording.
STOP
□
•If you leave the VTR in the pause mode for more
than 5 minutes, the VTR will stop automatically to
protect the tape and the video heads.
• Even if the video camera is equipped with video
recorder remote control functions, this VTR can not
be remote-controlled from the camera.
•Disconnect all cables from the Video Input and
Audio Input Sockets after finishing camera record­
ing.
If they remain connected, it is impossible to record
TV programmes.
Preparation
•Connect the Video Camera via the Camera AC Adaptor to
the VTR as shown in the illustration above.
•Insert a video cassette with the erasure prevention tab
intact.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
•Make sure that the Timer Record Function is set to “Off".
•Press the VTFVTV Selector to “VTR” position.
^ Turn the Camera AC Adaptor on and make the
necessary adjustments on the camera.
Refer to the operating instructions of the camera you
are using.
Q Press the Record Button {•) on the VTR to start
recording.
REC<
REC
Avoid recording unwanted material:
Press the Pause/Still Button
(II)
of the VTR, and the
recording will stop temporarily. To restart recording, press
the Pause/Still Button (11), again.
24