Be sure the power is on, Press { load/park] to load the paper, Press f function ] to enter the function mode – Panasonic KX-P3123 User Manual
Page 41: Note, Feeding paper setting the top of form (tof)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Feeding Paper
Setting the Top of Form (TOF)
This printer has a Top of Form (TOF) function which stores the first print line position and loads the
paper to the designated position automatically. The first print line position will be stored even after the
power is turned off. Additionally, the printer can store 3 different Top of Form positions depending on
the paper feed method, [fanfold paper-push ( Q ), single sheet ( Q ) and single sheet using the cut
sheet feeder (option: KX-PT10)]
1
Be sure the power is on.
If necessary, redefine the FORM LENGTH of the paper you are using through your application
software or the printer’s control table (eg* P. 44).
Press
{
LOAD/PARK] to load the paper.
To redefine your paper’s first print line position, It is recommended to use your
application software. If this feature is not provided in your software, adjust the paper
position by using the Line Feed, Micro Line Feed, or Reverse Micro Line Feed.
(113=* P.37)
Press f FUNCTION ] to enter the FUNCTION
mode.
Note:
• Do not rotate the platen knob, otherwise the
printer will not be able to count the number of
lines.
41