Command reference program, Note, Insert your setup disk into either drive a or b – Panasonic KX-P3123 User Manual
Page 84: For windows, Select run from the file menu, Type a:\cmdref (or b:\cmdref), Click ok (or press [enter ])
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Command Reference Program
The command reference program allows you to access a detailed explanation of each software
command or the proportional spacing tables on your computer screen. Each displayed explanation
can be printed out if required.
Before you use the setup disk, it is recommended that you make a back-up copy and store the original
in a safe place.
Note:
• Use the DiSKCOPY command of the operating system to make a back-up copy. Refer to your
DOS manual for further information.
• You may find it convenient to install the Setup Disk programs directly onto your C Drive, rather
than reading them from the Setup Disk each time a change is necessary. Either method is
acceptable.
To perform an automatic Installation of the Setup Disk files onto your C Drive, refer to page 64.
1
Insert your setup disk into either drive A or B.
<For DOS>
2
3
4
Type A: (or B:) and
o
press (Enter).
Type CMDREF
3
Press ( Enter).
A
Screen 1 will be displayed.
4
Screen 1
<For WINDOWS>
Select Run from the File menu.
Type A:\CMDREF (or B:\CMDREF)
Click OK (or Press [Enter ]).
Screen 1 will be displayed.
« Panasonic KX-P3123 command reference utility (xxxxxxxxxxx) »
-- SELECT EMULATION
—
lEPSOrC
IBM
[ T ] / ( i ]
Select emulation
[Enter]
Set emulation
(Ej
Exit to DOS
84