Panasonic KX-F900 - Manual (Page 41)

Remote fax receiving
(using an extension to receive a fax message)
If you have an extension phone connected to the mam unit or on the same line, it is possible to receive a fax
message by operating the extension phone Using the extension phone, dial the remote fax activation code
This saves you from going to the mam unit and pressing [START/COPY/SET]
Important:
•To activate this feature, use a touch tone telephone as the extension phone and enter the remote fax
activation code FIRMLY
•The remote fax activation code is set to as a pre-selected setting
• If your line has a rotary pulse service, press before pressing the remote fax activation code
Receiving using an extension---------------------------------------------
I When a call is received, lift the handset of the
extension phone
2 When
—document reception is required,
—a slow beep is heard, or
—no sound IS heard,
enter (*] (pre-selected remote fax
activation code) FIRMLY
3 Hang up the handset
•The mam unit is activated for reception
Changing the remote fax activation code
This code can be from 2 to 4 digits in length using numbers 0 through 9 and the character *
Press [MENU] 1
2
3
4
5
6
7
8
SYSTEM SET UP
Press [^, then 0 [T]
REMOTE FAX ACT
Press fSTART/COPY/SET]
MODE=ON A Y ]
Press or to select the desired setting
• If this feature is not required, select “OFF”
Press (START/COPY/SET)
CODE=H<*
Enter the new code number
Press [START/COPY/SET]
Press (MENU)
Note:
•Some special telephone company services
will require you to press a service access
code If you subscribe to such services, whole
or part of the remote fax activation code must
be different from the service access code
• If the remote fax activation code is set to
“0000”, the unit does not work properly
41