Auto tuning using the on screen display, Introduction, Preparations – Panasonic NV-HD630 User Manual
Page 13: Operations on screen display, Press menu, Select tuner preset, Select auto tune and press ◄ or
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Auto Tuning Using the On Screen Display
Introduction
The VCR is tuned automatically by Plug in Auto Tuning.
However, Auto Tuning using the On Screen Display should
be performed according to the following method if
necessary.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR and select any programme position
except A1 orA2.
Set the VCR—TV switch to VCR
for using the numeric buttons.
Operations On Screen Display
1
CLOCK SET
TUNER PRESET
CHAOO&DELETE
6-COOECHSET
OPTION
Press MENU.
Select TUNER
PRESET.
Notes:
• Auto Tuning searches for TV stations
from VHP minimum to UHF maximum
and memorizes every tuned programme
position. Other programme positions are
skipped.
• Auto Tuning takes five or more minutes
to complete its search.
• If the VCR is not correctly tuned by Auto
Tuning, follow the procedure on the next
page.
• To rearrange the channels at the desired
channel positions, proceed with Manual
Tuning.
Select AUTO TUNE
and press ◄ or ►.
•When Auto Tuning is
completed, the On Screen
Display disappears and
programme position 1 is
selected.
The number displayed here is
the number of channels still
to be auto tuned.
Channels that can be Received
VHF
CATV
UHF
NV-SD630A
0-12
45-470MHZ
28-69
NV-SD630EA
1-11
44-470MHZ
21-69
13