Making a copy, Copying, Operations – Panasonic NV-HD630 User Manual
Page 35: Preparations, 1 search for the end of the previous recording, Press ll/k (pause/slow), 3 press rec • to switch the vcr from, The pause mode to the recording standby mode. rec, 5 press □ (stop) to stop recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making a copy
Copying
Operations
This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of previous one.
Preparations
• Connect a movie camera or another VCR to this VCR as
shown.
• Insert a recorded cassette tape with an intact erasure
prevention tab.
• Select the audio source required by pressing INPUT
SELECT to set A1 or A2.
A1: Through the AV1 (AUDIO INA/IDEO IN) sockets.
A2; Through the AV2 (AUDIO INA/IDEO IN) sockets on
front panel.
Recording VCR
AUDIO IN/
VIDEO IN (AV2)
AUDIO INA/IDEO IN (AVI)
^ Jili» ' ' ' ^
—=
5
^
Piaybacfcwitt
1
Search for the end of the previous
recording.
Press ll/K (PAUSE/SLOW).
o
3
Press REC • to switch the VCR from
the pause mode to the recording standby
mode.
REC
a
4
Start the new recording by pressing I ■/!►
(PAUSE/SLOW) again.
ii/K
o
5
Press □ (STOP) to stop recording.
Note:
The new sound will be recorded on both the normal and
Hi-Fi sound tracks, only monaural sound recording is
possible on the normal sound tracks.
.O
i
§
0)
0
c:
1
55