Panasonic PV-4664 - Manual (Page 10)

One Time VCR Setup
The setup on pages 12 through 14 is vital for proper VCR operation.
Please read the instructions carefully and in the order presented.
NOTE: These first two pages contain reference material needed for setup on pages 12-14. Please look
over the information before you begin setup procedure.
Setup Overview
You will be performing the following tasks:
• Setting the language you want on-screen displays to appear in {English, Spanish, French).
• Telling the VCR what kind of equipment you are using to receive channels and how it is connected.
• Entering pertinent cable box or DSS receiver information if used.
• Entering a local PBS channel so that the VCR can receive auto clock set data. (Not available in all areas.
• Placing channels in memory and setting the clock.
Please Note Which Connection Method You are Using.
Make sure all equipment is hooked up as described on pages 6-9.
The diagrams below illustrate some of the basic connection types. Confirm which method you used for
later reference .
Back of
VCR
(^our
VKXO
Cable Box
RF Coaxial Cabla
{supplied)
B.<ANT/CABLE BOX ->DSS BOX ->VCR ->TV>
Connection Method 1 Connection Method 2
A.<CABLE BOX ->VCR ->TV> C.<VCR ->TV>
From Antenna
or Cable
D.<VCR ->CABLE BOX ->TV>
From Antenna
or Cable
ONE TIME SETUP IMPORTANT NOTES:
• For detailed DSS receiver connection instruction, please see your DSS operating manual.
• The DSS receiver must be turned off to view programs from the cable box or antenna.
• If you use a DSS receiver, it must be turned off for auto clock set.
• If your cable box is not remote controllable, it must be tuned to your PBS channel.
• If you use Audio/Video Jack connection between the VCR and cable box or DSS receiver, you must aiso
connect the RF coaxial cable in order to use the auto clock set and channel auto set features.
10