Panasonic PV-4664 - Manual (Page 19)

A ^ ^ \ Tape Operation
Your VCR is equipped with several time
saving features as well as convenient
automatic functions which make tape
operation easier than ever. Repeat Play
You can set your VCR up to play a recording over and over.
I menu
Push MENU to
display the menu.
SI
Rotate and push the
WHEEL to select SET
UP VCR.
MENU
SET CLOCK
SET UP CHANNEL
ID lOMAy UNGUE; ENGL ISH
SELECT
SET
END
ROTATE ViHEEL
PUSH WHEEL
PUSH MENU KEY
® (
1
)
Rotate the WHEEL to
select “REPEAT PLAY”,
then push to select “ON”
or OFF”. REPEAT PLAY
-- SET UP VCR............. .
: ON
BEEPER : ON
INPUT SELECT : TUNER
SET
audio mode
SET UP COMMERCIAL AOV.
SELECT
SET
END
ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
The VCR plays to the end of a tape, or until a blank portion of 30
seconds or more is reached. (Erased portions of tape are not
considered blank.) The tape is then automatically rewound and
played again and again until Repeat Play is cancelled. All function
buttons (REW, FF, etc.) are operational during Repeat Play.
Push MENU twice to
leave this screen.
Zero Search
You can reset the Time Counter to zero and then return to that point.
Push DISPLAY to
Disi^Y display the Time
O Counter overlay.
STOP 12:00AM CH08
0:00:30
SLP
COUNTER
RESET
Push COUNTER RESET
to reset the Time Counter.
• This may be done at as many
places as you wish on the tape.
STOP 12:00AM CHOe
0:00:00
SLP
C/A SKIP
ZERO
O
Push C/A SKIP ZERO
in Stop mode.
• The VCR will go into FF or REW mode and stop at the
last point the Time Counter was set to 0:00:00.
19