Alternative instructions, Manual clock set, One time vcr setup – Panasonic PV-4664 User Manual

Page 14: 14 manual clock set

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

One Time VCR Setup

Alternative Instructions

Complete the following steps if, during one time

setup, any of the following applies:

A You selected NO in step 4 on page 12 (you do not

use a cable box or DSS receiver).

B You selected connection method 2 (VCR-CABLE

DSS BOX- TV) in step 5 on page 12.

C You selected NO in step 7 on page 12 (your cable

box or DSS receiver is not remote controllable).

D You use a DSS receiver and selected YES in step

10 on page 13.

E Cable Box or DSS receiver can not be controlled

in step 10 on page 13.

фй

Turn on the cable box and set

the local PBS channel.

If you live near a different time

zone, make sure to set the
channel in your time zone.

If you use a DSS receiver, it

must be turned off.

CHANNEL/CIOCK AUTO SET

CONNECT ANTENNA CABLE

ANO IF YOU USE A CABLE

BOX.TUNE IT TO YOUR

LOCAL PBS CH THEN, . .

PLEASE PUSH CH UP KEY

VCR

Q

СЭ

CH о

Push CH ▲ to start

CHANNEL AUTO
SET and AUTO
CLOCK SET.

The following displays will appear in sequence.

“CH AUTO SET PROCEEDING”
“CH AUTO SET COMPLETED"
"AUTO CLOCK SET PROCEEDING”

WHEEL

ADD/

DELETE

This screen appears to confirm that

auto clock set Is completed.

VCR

Q

CH

Confirm that the

time is correct and

push CH

A

to exit

this screen.

If this screen appears,

auto clock set is not
available in your area.

Please set the clock

manually as described
at right.

12/25/1996 WED 12:OOPH

DST: ON

SETTING : CH02

AUTO CLOCK SET

COMPLETED

END : PUSH CH UP KEY

AUTO CLOCK SET

IS INCOMPLETE

PUSH MENU TO SET CLOCK

If the displayed auto clock set time and

D.ST, are not correct

If you live dose to two different time zones, the VCR may
recognize the wrong PBS station as the setting channel. If this

happens, please complete the following steps.

1 Make a note of the SETTING: CH number on screen and

push CH

A

to exit.

2 Delete the setting channel form channel memory. (See the

Add or Delete a Channel section on page 15.)

3 Push MENU button to display the menu.

4 Use the Wheel to select “SET CLOCK" and then to select

“AUTO SET."
• If you use a cable box and have multiple PBS stations, tune

the cable box to a different PBS station and try auto clock

set again using the menu.

14

Manual Clock Set

(In case Auto Clock Set could not

be performed)

1 Push MENU to

display the set

clock screen.

SET CLOCK

/I

BY ROTATING WHEEL

:PUSH WHEEL-*

TO END PUSH MENU KEY

2 Rotate and push

the Wheel to select

and enter the month,
date, year, time and

D.S.T. (Daylight

Saving Time).

* “DST:ON" automatically adjusts for

daylight saving time. (See page 5.)

To Make Corrections,

push the Wheel or CLEAR button
repeatedly to move back or forward to

the desired item.

3 Push MENU twice to

start the clock and
exit this mode.

2/1996 FRI 1:;

TO CORRECT

PUSH WHEEL OR CLEAR KEY

TO START PUSH MENU KEY

Advertising