Panasonic PV-4664 - Manual (Page 13)

Rotate and push the WHEEL
to set the Cable box or DSS
receiver code number that
matches your brand from
the list on page 11.
• This determines whether the
VCR will control your cable box
or DSS receiver.
- CABLE/OSS BOX SET UP -
CHOOSE A CODE NUMBER FOR
CABLE BOX/DSS RECEIVER
FROM THE LIST IN OWNER'S
MANUAL AND ENTER NUMBER.
m
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
If you use a cable box, tune it to
channel 02.
If you use a DSS receiver, tune
it to any channel other than 200.
Push WHEEL to continue.
If Cable Box
- CABLE/DSS BOX SET UP -
PLEASE TUNE YOUR CABLE
BOX TO CH02.
If DSS Receiver
PLEASE TUNE YOUR DSS
RECEIVER TO CH 270.
PROCEED :
END PUSH WHEEL
PUSH MENU KEY
Rotate and push the WHEEL
to select YES or NO.
If you use a cable box and
selected YES, go to step 11.
If you use a DSS receiver and
selected YES, go to the Alternate
Instructions on page 14.
If NO, the screen in step 8 will
reappear. Try entering a
different code assigned to your
brand and/ or repositioning the
equipment (see page 11).
If the answer is still NO, cable
box or DSS receiver control is
not available. Push MENU and
go to the Alternate Instructions
on page 14.
If Cable Box
- CABLE/DSS BOX SET UP
IS YOUR CABLE BOX
RECEIVING CH 09 ?
If DSS Receiver
IS YOUR DSS RECEIVER
RECEIVING CH 200?
SELECT
SET
END
NO
ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
Rotate and push the WHEEL
to select and set the local
PBS channel number you
receive on your cable box.
• If you live near a different time
zone, enter the channel in your
time zone.
............. SET CLOCK ..................
PLEASE ENTER YOUR LOCAL
PBS CHANNEL ON CABLE BOX
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
Confirm that your cable box is
on and that your DSS Box is off.
Push WHEEL to Start
CHANNEL AUTO SET and
AUTO CLOCK SET.
The following displays appear in sequence:
“CH AUTO SET PROCEEDING”
“CH AUTO SET COMPLETED"
“AUTO CLOCK SET PROCEEDING”
VCR
(3
CH
This display appears when
auto clock set is completed.
Confirm that the time is
correct and push CH ▲
to exit.
12/25/1996 WED 12:
DST:ON
SETTING : CH02
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
If the Auto Clock Set
displayed time is incorrect
If you use a cable box and
receive more than one PBS
station, try auto clock set again.
Follow the Set or Reset Auto
Clock Set steps and when the
instructions call for you to enter
a PBS station, make sure to
enter the one you have not
tried yet.
If AUTO CLOCK SET
INCOMPLETE appears
The screen below will appear
on-screen if auto clock set
data is not available in your
area.
AUTO CLOCK SET
IS INCOMPLETE
PUSH MENU TO SET CLOCK
Push MENU to display
the manual clock set
screen. (See the
“Manual Clock Set”
section on page 14.)
Note;
If you use a cable box and
receive more than one PBS
station, you may exit the
manual clock set screen and
try auto clock set again.
Follow the Set or Reset Auto
Clock Set steps and when the
instructions call for you to enter
a PBS station, make sure to
enter the one you have not
tried yet.
Auto clock set will be performed
when the VCR is turned off for
the first time each day. If you
use a cable box and you want
auto clock set to be performed,
the cable box must be left on at
the time the VCR power is
turned off.
13