CBM America CBM-720 User Manual
Page 42
CBM-710/720/730/750 User’s Manual
36
CITIZEN
11.2 Input Data Formats
(1) Paper feed command for "n" lines
D8
D1
1st byte
0
0
0
0
1
1
0
0
FF (0C)H + n
D8
D1
2nd byte
N7
N6
N5
N4
N3
N2
N1
N7 ~ N1 (Binary digits)
When the number of lines to be fed (2hd byte) is written-in following the paper feed command (1st byte), the
paper will be fed by the number of lines specified. The number of lines to be fed can be specified from n=1 to 127. If
"0" is specified, paper feed will not be carried out. When there is data in the print buffer at the time this co mmand is
applied, this data will first to printed out and then line feeding of "n" lines will be performed.
(2) Enlarged character command
D8
D1
0
0
0
0
1
1
1
0
SO (0E)H
The data following this command, are printed out in twice the normal width. This mode will continue until the
corresponding cancel command is input, or automatically released after printing one line. Since enlarged characters
are twice the normal width, care should be taken to avoid exceeding the column capacity.