CBM America CBM-720 User Manual
Page 43
CBM-710/720/730/750 User’s Manual
37
CITIZEN
(3) Enlarged character cancel command
D8
D1
0
0
0
0
1
1
1
1
SI (0F)H
This command is used or canceling e enlarge character mode set by SO, and the following data will be printed
out in the normal character mode.
(4) Paper feed command
D8
D1
0
0
0
0
1
0
1
0
LF (0A)H
When there is data in the internal print buffer, line feed will be carried out after printing is completed. When the
buffer is empty, line feed only will be carried out.
(5) Print command
D8
D1
0
0
0
0
1
1
0
1
CR (0D)H
By means of this command, line feed is performed after printing is completed. In order to accommodate the
print data output formats of various computers, the CR function is selectable. (Please refer to 10 (1) DIP Switch
Setting)
(6) Clear command
D8
D1
0
0
0
1
1
0
0
0
CAN (18)H
Print data previously entered on the same line can be cleared by the command.
(7) Red color print command
D8
D1
0
0
0
1
0
0
1
1
DC3 (13)H
This command specifies red colored characters and all of the characters on one line will be printed in red. Since
this command is cancelled after printing one line, it is necessary to use it for each line on whith red printing is
desired.