Dial [sound eq] to display manual, Press [3d al eq] to adjust the surround level, Adjust the sound quality – Panasonic SC-AK18 EN User Manual

Page 26: The sound quality wiffi the manual equalizer

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

W)

C

■ i

1

2

q>

tc

c

3

I

*0

3

cr

"0

c

3

00jr Jtm

Mam

■■■

\u

■iv

■■■ ■»

■■I- >*#■

D C

m«« ■■■

-T^*l\'\\l

■Bx.\%V

.001.imm

---- ........................ ■ ■ ■

«■ •■■■

■■■•

mw9-

^m/i!

■ KVV\V

■»-

mm\

Ifj

00i.jmm

•aam

the sound quality wiffi the

manual equalizer___________________

Dial [SOUND EQ] to display MANUAL”.

When it is turned clockwise, the settings are selected in the

following sequence.

©HEAVY -
® CLEAR
® SOFT

® DISCO

®

LIVE

® HALL

© MANUAL

® Al EQ
@ FLAT ---------

Adjust the sound quality.

® <-------

>

direction:

For selecting the range of the sound to
be adjusted

Characteristics of each sound range

Under

too

Hz:

Around 330 Hz:
Around 1 kHz:
Around 3.3 kHz:
Above 10 kHz:

® 4- T

direction:

Super woofer range
Bass to midrange
Midrange
Midrange to trebie

Treble

For adjusting the level (7 steps)

When the level is in the center, the dot flashes rapidly.

Repeat steps ® and

®

to set the desired sound quality.

The original display is restored on the display panel in about 5

seconds.

To release the equalizer

Dial [SOUND EQJ to display “FLAT’.

• The sound quality setting Is stored automatically. It is recalled

when “MANUAL” is next selected.

• All recordings are performed at the flat setting even if an alternative

sound quality setting has been selected.

Varying ffie sound quality

acoustK imoge (Al) equafi2

with the

tzer

The Al equalizer uses the SOFT, SHARP, HEAVY and LIGHT sound
quality coordinates to achieve subtle sound quality settings with ease.

Press [3D Al EQ] to adjust the surround level.

Every time you press the button;

3D Al 1

t

3D AI2

J

Al EQ (Light off)

Adjust the sound quality.

® <-----

i

direction:

SOFT-SHARP setting

@ 4- T

direction:

LIGHT-HEAVY setting

Repeat steps ® and @ to set the desired sound quality.

The original display is restored on the display panel in about 5

seconds.

To release the equalizer

Dial [SOUND EQ] to display “FUT.

• The sound quality setting is stored automatically. It is recalled

when “Al EQ" is next selected.

• All recordings are performed at the flat setting even if an alternative

sound quality setting has been selected.

RQT5258

Advertising
This manual is related to the following products: