Panasonic SC-AK18 EN - Manual (Page 6)

.r
s
£
^ ------- Adhesive tape
FM indoor antenna
AM loop
antenna
SC-AK29lSC-AK24lSC-AK23
Gray (+)
Red (+)
SC-AK18
SPEA«®"’
Red (+)
Black (-)
SPEA№^
Connections
Basic connections (for supplied accessories]
• Plug the AC power cord into a household AC outlet only after all
other connections have been made.
• To prepare the antenna wires and speaker cords, twist thé vinyl
cover tip and pull off.
Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where radio
signals are received with the least amount of interference.
DSISI
For best reception sound quality:
An FM outdoor antenna is recommended. (See page 7.)
Connect the AM loop antenna.
After attaching the antenna, turn on the system and tune in a
broadcast station. Then, turn the antenna to the angle of best
reception and least interference.
Connect the speaker cables.
Connect each end of the speaker cables to the terminal lever of
the same color.
Caution
Use only the supplied speakers.
The combination of the main unit and speakers prowde the
best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.
To prevent damage to circuitry, never short-drcuit positive (+)
and negative {-) speaker wires.
Caution
* Use the speakers only with the re­
commended system.
Failure to do so may lead to damage to the
amplifier and/or the speakers, and may result
in the risk of fire.
Consult a qualified service person if damage
has occurred or if you experience a sudden
change in performance.
* Do not attach these speakers to walls or
ceilings.
Connect the AC power cord.
The included AC power supply cord is for use with tfiis unit
only. Do not use it with other equipment.
RQT5258