Selecting the input mode, Record one program while watching another, Selecting channeis at the d-vhs vcr – Panasonic OMNIVISION PV-HD1000 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VCFVTV
Selecting the Input Mode
Press INPUT.
The display will change in the order below.
DTV-
c
Channel
Number
U I V------------V
LINE----- ^
or
Press CH A/T.
The display will change in the order below.
1 — 2—3-----------
c
^LINE'
(CABLE) (TV)
DTV'^ 125 or 69
D
VCR/TV
INPUT
CHANNEL
Up/Down
DTV: For rear audio/video connection of NTSC signal or
digital interface jack with IEEE1394 connection.
When DTV is selected, “d” is displayed in the Multi
Function Display.
LINE: For front audio/video connection.
When LINE is selected, “L” is displayed in the Multi
Function Display.
Record One Program While Watching Another
1
Press VCR/TV while recording is in progress to turn off
the VCR indicator in the Multi Function Display.
2
Use the TV channel controls to select a program. The
VCR will continue to record your program while you
watch any channel you choose.
• To switch back and forth between the recording and viewing
channel, press VCR/TV.
Selecting Channeis at the D-VHS VCR
1
Turn your TV and D-VHS VCR on.
• VCR Indicator lights on the Multi Function Display.
If indicator doesn’t light, press VCR/TV to turn it on.
2
Use CH A/V on the remote control or D-VHS VCR to
select channels.
• To switch back to TV channel selection, press VCR/TV to
turn VCR indicator off, or simply turn the D-VHS VCR power
off.
17