Panasonic OMNIVISION PV-HD1000 - Manual (Page 27)

With the proper audio mode setting, your D-VHS VCR can:
1) record and playback an MTS stereo broadcast (main language) in stereo Hi-Fi.
2) record and playback a monaural broadcast (main language) or Secondary Audio Program (sub language) on the Hi-Fi
tracks for better quality monaural sound.
3) playback non Hi-Fi tapes in monaural.
• When recording, the selected broadcast sound is always recorded on the left and right Hi-Fi tracks as well as the normal
monaural track. This means your tapes can be played back on Hi-Fi as well as non-Hi-Fi VCRs.
Audio Mode for Recording
1
Press SAP/Hi-Fi repeatedly
(each press within 5 seconds)
to select the desired audio
mode (STEREO, SAP, or MONO).
• Please refer to the “Receivable
Broadcast Types” section on page 26.
STOP 1 2 : 00AM CH08
1 :00:00
STEREO
(SAP)
MONO
SLP
The arrow indicates
your selection.
2
Do a recording.
See the “VHS Recording” section on page 16.
Audio Mode for Playback
A
Playback the tape.
See the “VHS Playback” section on page 15.
B Press SAP/Hi-Fi repeatedly
(each press within 5 seconds)
to select the desired audio
mode (HIFI or NORMAL).
• Select “HIFI” to listen to your stereo
recordings with stereo sound, or
“NORMAL” for monaural sound.
H I F I
NORMAL
The arrow indicates
your selection.
When purchasing or renting prerecorded tapes, remember that only those recorded in Hi-Fi stereo will
play back with true stereo sound. Standard stereo tapes will play back with monaural sound.
In order to listen to Hi-Fi stereo playback, the D-VHS VCR AUDIO (L/R) jacks must be connected to a
stereo TV or an external stereo amp and speakers. (See page 26.)
When adjusting the tracking during playback, the Hi-Fi audio sound may revert to normal audio sound.
This is normal.
There may be a difference in audio level between Hi-Fi and normal audio playback.
27