1 attach the battery, Charging lamp [charge, Removing the battery – Panasonic NV-VS3A User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
Attach the Battery.
•Align the Battery with line Q
it in the direction
of the arrow while holding it down.
2
Securely connect the AC Mains Lead to the AC
Adaptor and an AC Mains Socket.
•The [POWER] Lamp Q lights and then the [CHARGE]
Lamp 0 flashes and charging starts.
• If the [CHARGE] Lamp o does not flash even though
the Battery is attached, remove the Battery and then
re-attach it.
■ Charging Lamp [CHARGE]
Flashing: During charging
Lit:
The Battery can already be used to operate the
Movie Camera but is not yet fully charged.
(Approx. 30-minute battery charge)
Off:
The Battery is fully charged.
■ Removing the Battery
Slide it in the opposite direction of that indicated in step 1
above.
•Charge the Battery at a room temperature between 10°C and
30°C.
•When charging, do not connect the DC Input Lead to the AC
Adaptor,
• During recording or charging, the Battery becomes warm.
However, this is normal.
•If you charge the Battery when it is not yet discharged, the
[CHARGE] Lamp
0
may flash briefly and then go out. This
indicates that the Battery is fully charged. Therefore, this is
not an indication of a malfunction.
11