Ejecting the cassette, Inserting the cassette – Panasonic NV-VS3A User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
Connect the AC Adaptor or attach a charged
Battery. (-»10,13)
2
Turn the cog wheel O tighten the tape.
3
Slide the [AOPEN] Lever to the left and
simultaneously open the LCD Monitor in the
direction of the arrow approximately 90*'.
•Be sure to keep the LCD Monitor in its vertical position,
so that the Cassette Compartment Cover, when it
opens, does not hit the LCD Monitor.
4
Push the [A: EJECT] Button.
5
Insert the cassette with the cassette window 0
facing outward and push it all the way in.
6
Close the Cassette Compartment by pressing
the [LOCK] Button.
•If the AC Adaptor or Battery is used to supply power, it is
possible to insert or eject the cassette without turning on the
Movie Camera.
• It is not possible to take out the cassette during recording.
•Do not insert and take out the cassette repeatedly. This
could cause the tape to become loose or damaged.
•If a cassette with broken out erasure prevention tab is
inserted, the Indication flashes.
Ejecting the Cassette
Push the [A EJECT] Button and pull out the cassette.
Close the Cassette Compartment by pressing the [LOCK]
Button.
22