1 turn the [at] dial to set to [2000, 2 press the [set] button to select [month, 3 turn the [at] dial to set to [10 – Panasonic NV-VS3A User Manual
Page 29: 4 press the [set] button to select [date, 5 turn the [a t] dial to set to [15, 6 press the [set] button to select [hour, 7 turn the [a t] dial to set to [14, 8 press the [set] button to select [min, 9 turn the [at] dial to set to [30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
. C A M E R A S E T U P
2 .
D I G I T A L E F F E C T
' . T I T L E S E T U P
: O T H E R F U N C T I O N S
: L C D / E V F
s e t u p
29
Setting the Date and Time
If you select the [DATE/TIME SETUP] Sub-Menu of the
[CAMERA FUNCTIONS] Main-Menu, the menu shown above
appears.
The initial setting of date and time is 0:00,1st January, 2000.
For example: To set the clock to 15th October 2000,
14:30.
1
Turn the
[AT]
Dial to set to [2000].
The years change in the following order;
...1990...1991...2000...2089...1990...
2
Press the [SET] Button to select [MONTH].
3
Turn the [ A T ] Dial to set to [10].
4
Press the [SET] Button to select [DATE].
5
Turn the
[A T]
Dial to set to [15].
6
Press the [SET] Button to select [HOUR].
7
Turn the
[A T]
Dial to set to [14].
8
Press the [SET] Button to select [MIN.].
9
Turn the
[AT]
Dial to set to [30].
1 0
Press the [MENU] Button to finish the date
and time setting.
The operation of the clock starts from [00] seconds.
Pressing the button one more time makes
the menu disappear.
•
• If you select the [DATE/TIME SETUP] Sub-Menu when the
button-type battery is not Inserted into the Movie Camera or
is exhausted, the Main-Menu disappears and the [^]
indication flashes instead. Insert a new button-type battery
(•4 28) and then set the date and time again.
•As the Movie Camera’s built-in clock is subject to slight
imprecision, be sure to check the Indicated time before
recording.
•The clock employs the 24-hour system.