Panasonic NV-VS3A User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Tally Lamp Q
If you don’t want the Tally Lamp to light during recording, set
[TALLY LAMP] on the [CAMERA SETUP] Sub-Menu to [OFF].
'During recording, it is not possible to change the recording
mode ([MNL], [ ^ ]. [fc], [¿], [0], [g^']), even if you
press the [PROG. AE] Button. 59)
'If you leave the Movie Camera in the Recording Pause
Mode for more than
6
minutes, it automaticaily switches
off to protect the tape and to conserve battery power. To
resume recording from this condition, set the [CAMERA/
OFF/VCR] Switch to [OFF] and then to [CAMERA] again.
32
Advertising