To a desktop macintosh, Daisy chain connection, Connecting player to computer – Panasonic KXL-D742 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting Player to Computer
To a Desktop Macintosh
For connection, a SCSI cable for Macintosh is required.
Note:
• Use a shielded SCSI cable of 1 m (3.2 ft.) or shorter.
0
Make sure both the Desktop Macintosh and the player are off.
Daisy chain connection:
and Terminator" (P. 35).
(Factory setting of SCSI ID
number is 5, and be sure the
terminator is set to ON)
¥
Connect the half-pitch 50 pin end of the
SCSI cable to the SCSI interface connector
of the player.
Note:
• Make sure that the terminator is set to ON
(
ds
= P. 35).
You can connect this player to computer devices (up to seven devices). Make sure that
each SCSI device has different SCSI ID number.
For setting the SCSI ID number and terminator of this player, refer to “SCSI ID Number
SCSI cable
O
o
3
3
o
o
5‘
(O
o
Q>
■o
o
€
(D
“7
CD
O
O
3T
O
(D
(0
S
o
•O
17