Panasonic CW-1773SR - Manual (Page 10)

Please read the following before insialling the Air Conditioner.
Select the Best Location for the most efficient cooling.
Location
• The air conditioner should be installed in a dry place where there are no draughts.
• Condensation from the air conditioner must be drained to an appropriate location.
0
Do not install in a iocation where flammable gas leaks are a possibility.
• Using in locations where the air is salty such as beside the sea or near hot spas, or
where sulphurous gas is generated, may lead to a malfunction. Please consult your dealer.
• Ensure that the wall is strong enough to support the unit.
How to Install
There should not be any obstacles surrounding the unit.
Prepare the installation hole slightly bigger than cabinet size.
(FRONT VIEW)
Ceiling
(SIDE VIEW) (TOP VIEW)
1) PREPARE CHASSIS
• Remove chassis locking bracket by loosening
the screw.
• Slide the chassis out from the cabinet.
2) Place cabinet into opening and secure it by wood
screws or nails.
• The cabinet should be installed tilted slightly
lower to the rear for nescessary condensate
drainage. (Max. 10mm)
3) Slide Chassis into the cabinet which installed the
above 2).
• The tubings or ducting part should not be touched
with the cabinet.
4) Lock the chassis into cabinet by chassis locking
bracket.
5) Place FRONT GRILLE onto CABINET by screws.
• To place the grille, hook top of grille onto top of
cabinet, push bottom of grille in until it snaps
into place. Secure the Front Grille with the
screws at the right, left and centre of the grille.
- 9 -