Panasonic PANASYNC TX-D7F21 - Manual (Page 13)

Operation
< On-Screen Display> < Function and Operation>
Monitor Self Test
Figure A
N o S i g n a l
fH —.—kHz
fV —Hz
Figure B
E r r o r
fH 74.9kHz
fV 60.0 Hz
This display indicates that the monitor is
operating normally. When one of the following
conditions occurs, press one of the 4 front panel
keys to call the appropriate display.
1) No Signal (The computer is not connected or
the mains power to the computer is
disconnected). See Figure A.
2) The horizontal or vertical sync. Signal are
outside of the permitted range (the value of
the horizontal sync, signal will be displayed in
red and the value of the vertical sync, signal
will be displayed in white). See Figure B.
Menu
The adjusted items are represented by
icons.
When the D] key is pressed, the menu
screen appears.
Use the S • B keys to move the cursor
to the item to be adjusted, then press
the H] key to select the adjust menu.
1^ O
Q ig
o ;€)
?i.
aaa
O S D
a o o
F\
C o n it r a s t
3 Contrast
Brightness
E2 Size & Pos.
[Di H.Position
H.Size
a V. Position
CD V.Size
o Geometry
El
V.Pincushion
a Side Pin. Bal.
Q T rapezoid
D Parallelogram
Q Rotation
ep Color Temp
O ... Recall
:© Video Level
?t Language
SIl OSD Position
s\ Degauss
s Signal
3 Contrast adjustment
C o n t r a s t
100
3 ^
Adjust the screen contrast to match the
brightness level in the room. Press the H key to
make the image darker, the B key to make it
lighter. Pressing the H] key toggles between
brightness and contrast.
Direct operation: Even if the menu screen does
not appear, the contrast can be adjusted by
pressing the
H or B key.
Contrast adjusts the white level.
* If the a and B keys are pressed at the same
time on the Contrast adjustment screen, the
maximum level (100) will be set.
Brightness adjustment
B r i g h t n e s s
5 0
Q> ^ '
Adjust the brightness to match the brightness
level in the room. Press the 3 key to make the
background darker, the B key to make it lighter.
Pressing the H] key toggles between brightness
and contrast.
Brightness adjusts the black level.
* If the a and B keys are pressed at the same
time on the Brightness adjustment screen, the
standard level (50) will be set.
- 9 -