Panasonic PANASYNC TX-D7F21 - Manual (Page 7)

1 )
2
)
3)
Digital adjustment using the On-Screen Display
• The on-screen menu is available in 3 languages. French, English, or Spanish can be selected.
• Custom adjustments can be made quickly and easily through the on-screen menu utilizing four buttons on
the front panel.
• The on-screen main menu ailovirs these adjustments to be made easily by scrolling through the Icons to
select an adjustment menu. The choice bar is located at the bottom of the main menu and it shows the
currently selected adjustment menu's name.
• Set the on-screen menus at any one of six location on the display screen.
The Plug & Play E70 is a DDC 1/2B* compatible monitor that uses VESA* (Video Electronics Standards
Association) DDC ^{Display Data Channel) standard. This allows the E70 to Inform a compatible host of
its capabilities which meet the Microsoft* / Intel* Plug & Play Definition used by vyindows*95.
Power Management
• A power management circuit conforming to the VESA DPMS standard is incorporated into the monitor.
Power consumption of the monitor can be lowered when using it in combination with a video board that
meets the DPMS standard.
• This product conforms to the E nergy S tar * program.
As an E nergy S tar ? partner, Panasonic Computer Peripheral Company has determined that this product
meets the E nergy S tar * guidelines for energy efficiency.
4)
5)
6 )
7)
Environmentally Friendly
• Alt the plastic parts are recyclable.
Low emissions and static prevention
• The display unit meets the strict Swedish (SWEDAC) MPR II guidelines for lower ELF and VLF magnetic
fields and alternating electric fields.
• Anti-static coating of the cathode ray tube (CRT) reduces electrostatic charge buildup. This prevents
electrostatic shocks when touching the CRT screen and reduces dust buildup.
Color adjusting function
• The white reference color temperature is 9300K + 8 MPCD, 7500K, 6500K, 5000K, or a User Color can be
selected. For example, the monitor colors can be adjusted to match the colors of output generated on a
color printer.
• The white balance of an image can be adjusted as desired by individual adjustment of the red(R) and
green(G) and blue(B) signals. This feature enables color matching.
PanaSync digital multi-scan
• Horizontal frequencies of 30 kHz to 70 kHz and vertical frequencies of 50 Hz to 160 Hz can be
automatically tracked. The display unit is suited to VGA, SVGA, VESA, and high-resolution video boards of
1280(H) x1024(V)/60 Hz.
• Eight timing (1 preset and 7 reservation) selections have been preset by the factory for image size and
position. In addition there are 13 user programmable selections of timing.
Self-test menu
• The display unit can be checked via the self-test menu displayed on the screen. This menu can be
accessed without a computer.
DQ-DAF Electron Gun with Hyperbolic focus compensation circuit
• The exclusive DQ-DAF electron gun with a hyperbolic focus compensation circuit that controls the electron
beam is combined with an invar mask to display fine images over the entire area on the 17 inch
(16.0inch/40.6cm viewable), 0.27 mm dot pitch (H: 0.236 mm x V: 0.137 mm), flat and square screen.
10) Other features
• Automatic selection of synchronized input signals (separate or composite).
• An ergonomically designed tilt and swivel base to complement virtually any office design. The pan angle is
90 degrees to the right and left, and the tilt angle is 13 degrees up and 4 degrees down.
* VESA DDC
The E70 is a VESA DDC 1/2B type of display. The E70 is capable of continuously transmitting its EDID
(Extended Display Identification) using a uni-directional DDC 1 communications channel. In addition, the E70
can respond to a request for EDID, or complete VDIF (Video Display Interface), to be transmitted using DDC
2, Level B commands.
The EDID data contains the display identity and the basic display specifications. The VDIF data contains full
display specifications as defined in the VESA VDIF standard. If a DDC 2 capable host is detected by the E70,
it will switch to a bi-directional DDC 2 communications channel.
As required by the VESA DDC standard, once the E70 has switched from DDC 1 to DDC 2 it is incapable of
switching from DDC 2 back to DDC 1 unless the power is turned off.
8 )
9)
- 3 -