Panasonic kx-fmc230 - Manual (Page 104)

Error codes on the PC when using the Multi-Function
Center_____________________________________________
When using the Multi-Function Center software and an error occurs when the printer or scanner function is
initiated, an 8 digit error code will be displayed on the status log window.
See the printer 8 digit error code below. See the scanner 8 digit code on page 105.
Operations
PartHKiinic MessMO« Center - jStatrjs Luc||
Options window
fBS H BECnyr ll tfUr
Sunrw not raadv Eiioi r»dg - [IXncnOO
PihiB no) [eo4> Ena code • pool 0000
For Help, press R PUTBOK 0 rtamts) jINBOK. 1 newitemCs)
Error code for “Printer not ready.”:
Recording paper set lever:
When this digit is “1”, the recording paper set lever is
released. Push the lever back to reset {p. 20).
Paper jam near the recording paper entrance:
When this digit is “1”, the recording paper is not fed into
the unit properly or has jammed near the recording
paper entrance. To clear, see page 108.
Paper jam under the film cartridge or too much
paper on the paper stacker:
When this digit is “1”, the recording paper jammed
under the film cartridge or there is too much paper on
the paper stacker. Clear the jammed paper (p. 107) or
remove the printed paper.
Cover open:
When this digit is “1”, the top cover is open. Close it.
Film:
When this digit is “1”, the film is empty or the film is not
inserted in the cartridge correctly. Replace the film or
film cartridge with a new one (p. 110) or reinsert the
film correctly by referring to step 8 on page 111.
Unit overheat:
When this digit is “1”, the unit is overheated. Let the
unit cool down.
104
For Assistance, Call 1 -800-435-7329