Sending documents from memory, Setting memory transmission 1 2, Transmitting documents from memory – Panasonic kx-fmc230 User Manual

Page 52: Note

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Sending Faxes

Sending documents from memory

The unit is able to scan and store documents into memory, and then transmit the stored documents.
The memory capacity is approx. 25 pages, based on the CCITT No. 1 test chart in standard resolution. For the

CCITT No. 1 test chart, see page 124.

SYSTEM SET UP

Setting memory transmission

1

2

3
4

Press

[MENU],

Display:

Press then (T] [^.

MEMORY XMT

Press

[START/COPY/SET],

MODE-OFF [ Y A ]

Press @ or @ to select “ON”.

MODE=ON [ ▼

A ]

5

6

• If this feature is not required, select “OFF”.

Press f

START/COPY/SET].

Press

[MENU].

SETUP ITEM [

]

Transmitting documents from memory

Insert the documents FACE DOWN.

1

2

Enter the telephone number by using regular

dialing, one-touch dialing, speed dialing or the

electronic telephone directory.

When using regular dialing, press

iSTART/COPY/SETl.

•The documents will be fed into the unit and

scanned into memory.
After storing all of the pages, the unit will transmit

the documents.

•The amount of memory used will be shown as a

percentage on the display.

Display:

PAGES=0X

¿5

Amount of memory used

Note:
•The stored documents will be automatically erased after transmission.
•To cancei the memory transmission, press

[STOP]

during or after scanning the documents.

• If you select the fine, super fine or halftone resolution, the number of documents that can be sent will be

decreased.

• If the stored documents exceed the memory capacity, the transmission will be canceled.

52

Advertising