Panasonic TOUGHBOOK CF-50 - Manual (Page 17)

Touch Pad
Work Surface
Right Button
Left Button
Use the touch pad to move the cursor on the display and perform normal computer operations.
^ note )-
By design the touch pad is to be used with a finger tip only. Therefore, do not use any other
type implement on the touch pad, i.e. stylus, pen, or pencil eraser.
Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Touch Pad Operation
Move the tip of your finger
lightly over the surface.
or
double-clickincj
or
Two quick taps, but on the sec- While holding down the but-
ond tap leaving your finger ton, moving your finger on
down (applying pressure) and the work surface,
moving it on the work surface.
rHandlingthe-Touch-Pad-i
Do not place any object on the work surface or press down forcefully with sharp-pointed
objects (e.g., nails) or hard objects that can leave marks (e.g., pencils and ball point pens).
Try to avoid having any harmful substances, such as oil, come in contact with the touch
pad. The cursor may not work properly in such cases.
When the touch pad becomes dirty:
Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth first
applied with detergent diluted with water and then thoroughly wrung.
Do not use benzene, thinner, or disinfectant-type alcohol.
17