Panasonic TOUGHBOOK CF-50 - Manual (Page 25)

10 At the confirmation message, select [Y].
The operations of reinstallation for the hard disk start au­
tomatically. (The operations take about 15 minutes.)
When the message “insert the next CD” is displayed, in­
sert the Product Recovery CD-ROM showing the next
number in the sequence, and then select [OK],
X
n
Л
л
>
If the message “The media does not contain the cor­
rect file” appears, select [OK]. The message “insert
the next CD” will be displayed again.
Confirm that the proper Product Recovery CD-ROM
has been inserted by opening the tray of the CD drive
and then close the tray, then select [OK].
11 After the reinstallation procedure completes, the follow­
ing message will appear on the display.
«iMEMiMil ______________________
Windows(R) 2000 Professional install wizard will start after reboot.
Remove the Product Recovery CD-ROM, then restart Ihe computer by pressing
Ctrl + Alt + Del (Delete),
Windows(R) XP Professional install wizard will start after reboot.
Remove the Product Recovery CD-ROM, then restart the computer by pressing
Ctrl + Alt + Del (Delete),
Remove the Product Recovery CD-ROM, then restart the
computer by pressing fCtrn + fÂÏTl+rDër).
12 When the message [Press F2 to enter SETUP] is displayed,
press ( F2 ) and then run the Setup Utility.
If the password has been set, enter the Supervisor Pass­
word. ____
13 Press ( F9 ).
At the confirmation message, select [Yes] and press
( Enter ). (The Setup Utility settings will return to their
default values. Even the security settings with the excep­
tion of the password(s) will return to their default values.)
Change the settings where necessary.
14 Press C F10 ).
At the confirmation message, select [Yes] and press
( Enter ).
15 Perform the setup procedure for Windows by following
the instructions on the screen. ((3^ * 0
<Changing the drive letter>
You can change the drive letter for the CD drive or hard disk
drive by the following steps.
• Drive letters can only be changed when two or more parti­
tions have been created on the hard disk drive. The name
of the C: drive cannot be changed.
• We recommend that you make these changes before in­
stalling applications.
1 Select [Start] - [Settings] - [Control Panel] - [Administra­
tive Tools] - [Computer Management].
2 Select [Disk Management] from [Storage].
3 Right click on the partition of the hard disk or the name of
the CD drive and select [Change Drive Letter and Path].
4 Select [Edit].
5 Select [Assign a drive letter] and the new drive letter, and
then select [OK].
6 At the confirmation message, select [Yes],
1 Select [start] - [Control Panel] - [Performance and Main­
tenance] - [Administrative Tools] - [Computer Manage­
ment] .
2 Select [Disk Management] from [Storage].
3 Right click on the partition of the hard disk or the name of
the CD drive and select [Change Drive Letter and Paths].
4 Select [Change].
5 Select [Assign the following drive letter] and the new drive
letter, and then select [OK].
6 At the confirmation message, select [Yes].
A note )-
When the FIRSTAID FD is to be created, follow the steps
in the readme.txt on the disk. ((3^ *2)
25