Panasonic TOUGHBOOK CF-50 - Manual (Page 30)

Easy CD Creator™ 5
How to access the Online Manual
Refer to the following menu for information on the functions of each application.
WiFiMAWliliy : Select [Start] - [Programs] - [Roxio Easy CD Creator 5] - [Project Selector], then select [help],
: Select [start] - [All Programs] - [Roxio Easy CD Creator 5] - [Project Selector], then select [help].
Refer to the Help menu of each application for information about specific operations.
Running Easy CD Creator
Refer to the online manual described above) for information on the operation and use
of each function.
Cautions on Use
When ^ is displayed on the taskbar, the [Auto Disconnect] screen of Dial Up may not be displayed and the computer will
continue to be connected when Internet Explorer is closed. In such cases, double-click the Dial Up icon ^ on the taskbar
and disconnect the line.
When a new CD-R disc is inserted, Project Selector is typically displayed. If there is no display, try setting the CD-R disc
again. If there is still no display, open Project Selector from the start menu.
When selecting names for external CD drives or drives created using “virtual CD” software, use letters that come later in the
alphabet than the drive letter for the internal CD drive.
When writing data using DirectCD, remove the CD-R/RW disk, and complete the writing process before doing any of the
following:
• Shutting down or restarting Windows
• Logging off Windows or using the fast user switching function
• Entering standby or hibernation mode
Do not use the emergency hole of the CD drive when removing the disc.
note )—
• When reading data of a CD formatted with DirectCD on another computer:
• The UDF Reader installation screen is displayed.
Install the UDF Reader. Although the message on the screen indicates that the reader is for use with Windows 95 or
Windows NT, it can be installed on other operating systems as well.
• The UDF Reader installation screen is not displayed and the data cannot be read.
CDs formatted with DirectCD cannot be used with this computer. Use a data CD that was not written by DirectCD
format.
• When a CD cannot be formatted with DirectCD, try formatting it by the Administrator.
Information
If Easy CD Creator does not operate properly, we recommend carefully reading the online help file first for problems with
the operating environment or operations.
If you still cannot troubleshoot the problem, contact Panasonic Technical Support.
About Copies
When writing to CD-R/RW, make sure that you are not infringing any copyrights.
It is illegal to copy audio CDs for non-personal use.
When backing up software, make sure that you are not infringing any software copyrights for that product.
30