Document Outline

• Operating Instructions
  • Video Cassette Recorder
• Contents
• Precautions
• Connections
  • Display Symbols
    • Set the TV to an unused position which you wish to use for your video playback.
    • Set TEST SIGNAL to OFF.
• storing TV Broadcasts into your VTR
• □
  • Fine Tuning Procedure
  • Blanking of Unoccupied Programme Positions
  • Channel Plan
  • Setting the Clock of the VTR
  • 2 1.3
    • Preparation
    • Display Symbols
      • Keep CLOCK SET pressed until a bleep sound is heard.
      • 2 Set each item by pressing + or — and NEXT.
      • Set Year “99”.
      • Set Month “10”.
      • Set Date “16”.
• □
  • Set Minute “15”.
  • Press CLOCK SET.
  • Controls and Connection Sockets
    • O OPERATE
    • © NOISE FILTER
    • o CHECK/PROG
    • © TIMER REC
    • © PAUSE/STILL
    • © PLAY
    • 0 CLOCK SET
  • Infra-red Remote Controller
    • Power source for the remote controller
    • Precautions for battery replacement
    • Loading the batteries
  • Playback
    • Operations Display Symbols
      • Insert a recorded cassette tape.
      • Start viewing the picture.
      • Search forward by tapping FF.
      • Search backward by tapping REW.
      • View a Still picture.
      • Stop viewing the picture.
    • To change the playback speed
  • 0
    • To obtain high speed picture during fast forward or rewind
    • To skip scene
  • O
    • To return to a specified scene
  • O
  • O
    • To playback a recorded part repeatedly
  • O
    • On-the-spot Recording
      • To interrupt recording
      • To record one TV programme while
      • viewing another programme
      • To display the approximate remaining
      • tape time
    • other Functions
      • Automatic VTR off time setting
• □
  • #
    • Automatic playback
    • VTR-off playback
    • Automatic rewinding
    • Automatic switching off and ejection
  • Timer Recording
    • Preparation
    • For Example:
    • Display Symbols
    • Select Timer Programme number “1 ”.
  • #
    • 2 Set each item by pressing + or - and NEXT.
• □
  • Set Programme position (channel) “2”.
  • Set Date “27 ’.
  • Set Starting time (hour) “20”.
  • Set Starting time (minute) “02”.
  • Set Ending time (hour) “21 ”.
  • Set Ending time (minute) “30”.
  • i
    • To activate timer recording, press TIMER REC.
  • i
    • Setting for Daily and Weekly Timer Recording
    • Setting other Programmes in Succession
      • Weekly recording
    • Timer Recording from External Signal Source
    • Checking a Timer Programme
    • Cancelling a Timer Programme
    • For Example:
    • Preparation
    • Operations
      • Press PROG.
      • Enter Date “3”,
    • Press TRANSMIT.
  • #
  • #
    • Enter Starting time (minute) “02”,
    • Y Enter Ending time (minute) “30”.
    • Daily Timer Recording
    • Weekly Timer Recording
    • Cancelling a Timer Programme
    • Timer Recording from External Signal Source
    • Checking a Timer Programme
  • Search Function
    • Preparation
    • For example:
    • Operations
    • Display Symbols
    • Recording Index Signals
  • #
  • Editing
    • Assembly Editing
      • Preparation
      • Operations
        • H Search for the end of the previous ■ recording.
        • 2 Press PAUSE/STILL at the end point.
  • 0
  • a
    • start the new recording by pressing PAUSE/STILL again.
    • Bar Code Operation
      • Operating the Remote Controller
      • When the Bar Codes Cannot be Read
    • #
      • Reading the bar codes
      • ^ Preparation
      • For Example:
      • Operations
      • Trace the code for SETTING OF THE CLOCK.
        • 2 Trace the bar code YEAR “1999”
        • Trace the bar code MONTH “10”
        • Trace the bar code DATE “16”.
        • Trace the bar code for the hour START TIME “20”.
        • To transmit the data to the VTR, press TRANSMIT toward the VTR.
      • To turn off the remote controller, press SCANNER ON/OFF.
      • Timer Recording
        • Setting Timer Recordings from Bar Codes
          • CANCEL
        • Preparation
        • For Example:
        • Operations
          • Trace the bar code for CHANNEL “4”
          • Trace the bar code for DATE “3”.
        • Set Ending time.
          • fi-
        • 0 To turn off the remote controller, press ^
        • SCANNER ON/OFF.
        • Daily Timer Recording
        • Weekly Timer Recording
        • Timer Recording from an External Signal Source
        • Checking a Timer Programme
        • Cancelling a Timer Programme
        • Turning the Timer on and off
    • Before Requesting Service
    • Specifications
      • NV-SD10A, EA
      • Power Source:
      • Power Consumption :
      • Video Recording System: Video Heads;
      • VIDEO
      • input Levei:
      • AUDIO Input Level:
      • Video Horizontal Resolution: