Panasonic NV-H65 Series - Manual (Page 12)

VHF UHF
I III U
i NV-H65A 0-5 5 A-11 21-69
1 NV-H65EA 1-3 4-11 21-69
1 NV-H65BA 4-13 21-68
The tuner in the VTR can be preset up to 16 stations.
Preparation
»Turn the TV set on and select the programme position
(channel) which you have tuned to the video playback
channel.
©Press the VTR On/Otf Switch to turn the VTR On,
©Set the Input Signal Selector to "Tuner”.
»Press the VTR/TV Selector to "VTR” position.
For the NV-H65BA no selector is fitted.
^ Press the START/OFF Button.
The indication on the Multi-Function Display changes
from the clock indication to the position indication.
^ Press the Channel Up or Down Button to select a
programme position (channel) which you want to tune
to a TV station.
r---------------------------------------------------------------------
Display of the programme positions 1 -16
s/
Indication of the
selected TV band
Selection of the
programme position
Press the BAND/AFC Button to select the "I”
(NV-H65A, EA), "III” or "U” position.
Press the SEARCH (-I-) or (-) Button.
During the station search
(The position indication
flashes on and off.)
Tuned condition/
When a station'is
tuned
z Q ^
^ ' O' f El
b- I
n
'v
P o' /
fa- I
®When the tuning of the station is completed, the
indication stops flashing and the tuned station is
automatically memorized.
®At every push of the SEARCH (-) or (+) Button, the
station will be tuned automatically.
Repeat steps
station.
for each channel you want to tune to a
H START BAND CLEAR
W f—1 1
1___1 % i'O □
OFF AFC
1----- SEARCH--------j
7 □ □ 1
L-FINE TUNtNG-l
Press the START/OFF Button again.
The indication on the Multi-Function Display changes
to the clock indication.
® Press the START/OFF Button.
Press the Channel Up or Down Button to select a
programme position (channel) which you want to tune
to a TV station.
(3) Press the CLEAR Button ("—” will be displayed in the
Programme Position Indication).
P 0 i b
«Repeat steps (|) and (3) for all programme positions
on which no stations are to be tuned. Afterwards,
these programme positions will be skipped during
Up/Down selection of the programme position.
@ Press the START/OFF Button again.
If fine tuning is necessary, for example for a weak station
which is close to a strong station:
1. Make sure that the START/OFF Button is in the Off
condition, i.e. the Multi-Function Display shows the
present time.
2. Press the FINE TUNING or “-I-" Button to obtain
the best tuning condition.
®To return the tuning to its former state, press the
BAND/AFC Button.
12