OEM Controls CANBus Product Line - Manual (Page 17)

OM-17288
CANBus USERS MANUAL Page 17 of 38
Revision C
GJO*07-12-06
ORIGINAL
JS Controller adjustment menus
[menu screen 10] “DRIVE FWD” is blinking
[menu screen 11] “THRESH” is blinking
[menu screen 12] “the adjustable parameter” is blinking
The HMI will enter menu screen 10 if all joystick channels are OFF (for static
adjust).
The HMI will enter menu screen 11 if one or more channels are ON, with the
most recently moved joystick’s function selected.
The HMI remembers the function (channel and direction) and the adjustment that
was most recently made for ease of use. On initially powering the OCI-1,
channel 1 direction A Threshold is selected.
Use <UP> and <DOWN> to select a flashing item. Use <SELECT> to select it
and go to the next menu screen. Use <SAVE> / <EXIT> to save an adjustment
and return to the previous menu screen.
Use <PLUS> and <MINUS> to adjust a parameter. Note – there are customer
specified limits to every adjustment
DRIVE FWD THRESH
Fn1A 25.5 % THRESH
Fn1A 25.5 %
DRIVE FWD THRESH
Fn1A 25.5 % DRIVE FWD
Fn1A 25.5 %
DRIVE FWD THRESH
Fn1A 25.5 % DRIVE FWD THRESH
Fn1A %