OEM Controls CANBus Product Line - Manual (Page 18)

OM-17288
CANBus USERS MANUAL Page 18 of 38
Revision C
GJO*07-12-06
ORIGINAL
I/O Test menus
These four screens are in the IO TEST menu. Pressing <MENU> will cycle
through them. When in a given screen, such as AI, use the <UP> and <DOWN>
keys to scroll through all of the system’s input or output signals.
Press <EXIT> to return to the top level menu screen.
CANBus menus
There is one display screen for each CANopen module in the system.
The first line is a 16-character string (put in by the application engineer) that
identifies the product type and additional information.
The second line shows the CANopen Node ID and the bus status which is one of –
-OPERATING normal operation per CiA spec.
-STOPPED stopped per CiA spec
-PRE-OP pre-operational (just powered up) per CiA spec
-RESET just performed a power-on reset per CiA spec
-NO DATA the module is not communicating
AI 10 11 12 V
9.99 9.99 9.99 Di11 12 13 14 15
1 1 1 0 0
OCI-1 BRAIN
ID 0 OPERATING OCO-1 MAIN BANK
ID 102 OPERATING
OCO-1 AUX BANK
ID 103 OPERATING OCI-1 BUCKET JS
ID 64 NO DATA
Do35 36 37 38 39
1 1 1 1 0 VDD POWER SUPPLY
12.34 Volts
PWM 11 PWM 12
45.5 % 100.0 %