OEM Controls CANBus Product Line - Manual (Page 19)

OM-17288
CANBus USERS MANUAL Page 19 of 38
Revision C
GJO*07-12-06
ORIGINAL
Restore Factory Defaults
“PRESS SELECT” is blinking.
“NO” is blinking.
Use the <UP> and <DOWN> keys to select YES if you wish to actually restore all
adjustments to their factory default settings. Then press <SELECT>
If “YES” was selected, you will see the following animated screen.
After this is finished, the HMI will return to menu screen 0.
RESTORE DEFAULTS
PRESS SELECT RESTORE DEFAULTS
RESTORE DEFAULTS
YES or NO ? RESTORE DEFAULTS
YES or NO ?
RESTORING NOW !
... RESTORING NOW !
...........