OEM Controls CANBus Product Line - Manual (Page 29)

OM-17288
CANBus USERS MANUAL Page 29 of 38
Revision C
GJO*07-12-06
ORIGINAL
Setting Up Hyper Terminal
The Microsoft Windows program “Hyper Terminal” can be found in the START menu – it is usually in
one of these locations:
Start – > Programs – > Accessories – > Communications (Win2000 WinXP)
Start – > Programs – > Accessories (Win95 Win98 WinME)
1. Start Hyper Terminal and then choose “Properties” from the FILE menu.
2. In the Properties window (shown below-left) choose Direct to Com 1 in the “Connect using:”
box (you may also use any other available COM port, such as Com 2).
3. Click on the “Configure” button. The COM1 Properties window (shown above-right) is
displayed. Set all five options –
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Then click on the Apply button, and then the OK button – this closes the COM1
Properties window. Finally, click on the OK button in the Properties window.