360 Systems DigiCart/II Plus - Manual (Page 47)

DigiCart/II Plus Owner's Manual Operating Instructions • 35
Keyboard Type
Selects between the convenient DigiCart/II Plus MINI keyboards and conventional PC-AT keyboards.
Either type may be attached to the KEYBOARD connector on the back panel.
The SETUP MENU provides a choice between the standard 101-key PC-AT style keyboard, a
small footprint mini-keyboard (Model RC-205), and an infrared-linked mini-keyboard available
from 360 Systems. Contact your 360 Systems Dealer for details on these accessories.
To choose between keyboard types:
1. Press the SETUP MENU button and use the selection controls to choose and
confirm your selection:
KEYBOARD TYPE
MINI
OR
KEYBOARD TYPE
STANDARD
The selection will be stored in non-volatile memory so that if DigiCart/II Plus is turned off, the
correct keyboard will be selected on power-up.
NOTE: The keyboard must be connected at the time of power-up, or DigiCart/II Plus will not
recognize it. If connected after power is on, press SEC + DNET XFER to re-initialize (soft re-
boot) the system.
K EYBOARD M APPING A SSIGNMENTS
The chart below shows mapping of keys to DigiCart/II Plus functions. Function keys F1 through
F12 and arrow keys have been "mapped" to front panel buttons and select knob for remote control
of all DigiCart/II Plus functions.
KEY MINI KEYBOARD
FUNCTIONS
STANDARD KEYBOARD
FUNCTIONS
F1 UTILITY MENU UTILITY MENU
F2 SETUP MENU SETUP MENU
F3 EDIT MENU EDIT MENU
F4 VIEW LIST VIEW LIST
F5 PAUSE PAUSE
F6 PAUSE LOOP
F7 LOOP SECONDARY
F8 RECORD DNET XFER
F9 STOP FIND
F10 PLAY RECORD
(FN) F11 SECONDARY STOP
(FN) F12 DNET XFER PLAY