acidlab Bassline3 - Manual (Page 12)

12
Programming Pattern Length (Pattern Write Tap Mode)
When you press the buttom Lenght, the LEDs 1-8 of the row light. Now you can
select the last step 1-8, and the pattern length of your active pattern. You press one
buttom 1-8 of the keyboard, and this step is selected as the last step of the pattern.
E.g. step 3. Now the Pattern repeats after the third step, and is 3 steps long. Press
the buttom Length twice, and the LEDs 9-16 lights. Now you can select the pattern
length between 9-16. The programmed pattern length is transferred to the other
modes. The not played steps stay in the memory.
Programming Scale (Pattern Write Tap Mode)
Press the Roll/Scale buttom while holding down the Select button.
Now you can select the step 1-4, and the pattern scale of your active pattern.