acidlab Bassline3 - Manual (Page 15)

15
A second possibility to select the step (direct step-selection)
Press the buttom Select continuously, and the first LEDs of the row light.
With pressing one of the buttoms 1-8 of the keyboard, the step is directly selected
e.g. the step 7. Now this step can be changed.
With pressing the buttom Select twice and holding, the upper eight LEDs 9-16 lights,
and with the buttoms 1-8 of the keyboard, the steps 9-16 can be selected directly.
The LED in the upper LED row, shows the active step.
Step programming
The LED row always indicate the active step, with a flashing LED. The played step is
shown with the LED running from the left to the right.
The pitch of a programmed note on this step is shown continuously on the keyboard.
When there is no note programmed, no LED lights continuously (just the flashing
LED indicates the selected pattern 1-8).
With the buttoms Accent, Slide, Octave Up/Down, you can change or add these to
the programmed notes.