acidlab Bassline3 - Manual (Page 17)

17
Programming Pattern Length ( Pattern Write Step Mode)
When you press the buttom Lenght, the LEDs 1-8 of the row light. Now you can
select the last step 1-8, and the pattern length of your active pattern. You press one
buttom 1-8 of the keyboard, and this step is selected as the last step of the pattern.
E.g. step 3. Now the Pattern repeats after the third step, and is 3 steps long. Press
the buttom Length twice, and the LEDs 9-16 lights. Now you can select the pattern
length between 9-16. The programmed pattern length is transferred to the other
modes. The not played steps stay in the memory.
The Pattern length programming is as in the Pattern TAP Write mode!
Programming Scale (Pattern Write Step Mode)
Press the Roll/Scale buttom while holding down the Select button.
Now you can select the step 1-4, and the pattern scale of your active pattern.