Initial configuration, Isp settings, Nitial – ALFA NETWORK AIP-W505 User Manual
Page 32: Onfiguration
– 32 –
4
I
NITIAL
C
ONFIGURATION
The 11n Router offers a user-friendly web-based management interface for
the configuration of all the unit’s features. Any PC directly attached to the
unit can access the management interface using a web browser, such as
Internet Explorer (version 6.0 or above).
ISP S
ETTINGS
If you are not sure of your connection method, please contact your
Internet Service Provider. There are several connection types to choose
from: Static IP, DHCP (cable connection), PPPoE (DSL connection), PPTP,
and L2TP.
N
OTE
:
If using the PPPoE option, you will need to remove or disable any
PPPoE client software on your computers.
C
ONNECTING
TO
THE
L
OGIN
P
AGE
It is recommended to make initial configuration changes by connecting a
PC directly to one of the 11n Router’s LAN ports. The 11n Router has a
default IP address of 192.168.2.1 and a subnet mask of 255.255.255.0.
You must set your PC IP address to be on the same subnet as the 11n
Router (that is, the PC and 11n Router addresses must both start
192.168.2.x).
To access the 11n Router’s management interface, follow these steps:
1.
Use your web browser to connect to the management interface using
the default IP address of 192.168.2.1.
2.
Log into the interface by entering the default user name “admin” and
password “admin,” then click Login.
N
OTE
:
It is strongly recommended to change the default user name and
password the first time you access the web interface. For information on
changing user names and passwords, See