ALFA NETWORK AIP-W505 - Manual (Page 64)

C HAPTER 7 | Wireless Configuration
Basic Settings
– 64 –
The Basic Settings page allows you to configure the wireless network name
(Service Set Identifier or SSID) and set the wireless security method.
Click on “Wireless Settings,” followed by “Basic.”
Figure 33: Basic Settings
The following items are displayed on this page:
◆ Wireless On/Off — Enables or Disable the radio. (Default: Enable)
◆ Network Mode — Defines the radio operating mode.
(Default: 11b/g/n Mixed)
■
11b/g mixed: Both 802.11b and 802.11g clients can communicate
with the 11n Router (up to 108 Mbps), but data transmission rates
may be slowed to compensate for 802.11b clients. Any 802.11n
clients will also be able to communicate with the 11n Router, but
they will be limited to 802.11g protocols and data transmission
rates.
■
11b only: All 802.11b, 802.11g, and 802.11n clients will be able to
communicate with the 11n Router, but the 802.11g and 802.11n
clients will be limited to 802.11b protocols and data transmission
rates (up to 11 Mbps).
■
11g only: Both 802.11g and 802.11n clients will be able to
communicate with the 11n Router, but the 802.11n clients will be
limited to 802.11g protocols and data transmission rates (up to 54
Mbps). Any 802.11b clients will not be able to communicate with
the 11n Router.
■
11n only: Only 802.11n clients will be able to communicate with
the 11n Router (up to 150 Mbps).